Add a Comment

Comment by James Wells on May 16, 2012 at 19:38

Sorry to ask the same question twice. First time round I think I managed to email everyone... Anyway. This is my first season using a second hand Bahia,  firstly I do not have a manual and would happily pay for one if Etesia could get me one. Secondly the cutter switch is being really inconsistent. I used it today for an hour, fine, loaded to take to second job and the blades would not engage. This has happened two other times that I have taken it out. First time, luckily I had just finished the job.  I messed around swapped all the fuses, checked the switch, wires etc..as a last gasp fired a bit of wd40 around the belts and that made it work. The wd40 worked on the second occasion this happened (half way through a job) , but today no matter how much I put on this did not... I cannot continue with this problem. Please is there anyone who can help me fix this myself or is it one for the dealer. Many Thanks James.

PRO Member Comment by Neal Barker @ Etesia uk on May 14, 2012 at 15:25

these are the best pics i can get.

these were taken last year by our guys in france at the etesia factory and shows what the little bahia can do with its plough

 

bahia%20snow%20pics.pdf

Comment by Darren Scorey on May 9, 2012 at 20:57

Thanks Ian

Comment by Darren Scorey on May 8, 2012 at 20:53

do they stop the blade spinning freely?

Cheers

Comment by Darren Scorey on May 7, 2012 at 18:12

Hi, Can you tell me if the shear bolts for a Bahia are the same on a phtb?

Any joy on the snow blade pics/video

Cheers

Comment by les malin on April 17, 2012 at 13:42

http://www.landscapejuicenetwork.com/profiles/blogs/etesia-announce...

Hi Phil, above is the link that was put on the site by Chris Bassett our marketing man on the 28.02.12 at 10.39 to which you replied at 18.40

So I am surprised by your comments below, We did have a couple of LJN members at the show, so it was obviously seen by some members.I agree it would of been better on the Etesia page, so something we will look at next time

PRO Member Comment by Phil Voice on April 17, 2012 at 12:43

It's disappointing, after the amount of time LJN members have put in promoting the Etesia brand and helping them with feedback regarding their dealer network, that Etesia haven't taken the time or trouble to add details of their roadshow to this group.

PRO Member Comment by Neal Barker @ Etesia uk on February 25, 2012 at 22:42

hi darren

its proving a little longer to get hold of the pics and video as our connection has not been to great at work latley, im hopeing its better monday so i can get hold of the info needed for me to help a few guys on here with questions.

 

just wanted to let you know i have not forgot you

 

regards

neal

Comment by les malin on February 23, 2012 at 7:12

Hi Darren, £657 retail, this may vary a little depending on the age of the machine. We have a demo unit just need snow again, but they work really well,we use one at base for the court yard areas.

Comment by Darren Scorey on February 22, 2012 at 23:33

Cheers chaps.

Would like to see it in action, am i right in thinking there about £400?

• ‹ Previous
• 1
• 2
• 3
• 4
• 5
• …
• 11
• Next ›
• Page