Tags:

Permalink Reply by John on June 19, 2010 at 15:00 If you think that laying the turf rolls across the gap will be easier than following the curve then just carry on and do it that way.
The advantage of laying across the gap will be all turf rolls will be laid flat as appossed to having to wrinkle them to follow the curve.
Lay off the inner curve. occassionaly adjusting the end of the roll, square to the face of curve, and simply infill the segmental joints with cuttings.
No unneccessary waste by using this method.
Good luck on Monday

If you think that laying the turf rolls across the gap will be easier than following the curve then just carry on and do it that way.
The advantage of laying across the gap will be all turf rolls will be laid flat as appossed to having to wrinkle them to follow the curve.
Lay off the inner curve. occassionaly adjusting the end of the roll, square to the face of curve, and simply infill the segmental joints with cuttings.
No unneccessary waste by using this method.
Good luck on Monday
Permalink Reply by Geoff Norfolk on June 19, 2010 at 19:55
Permalink Reply by John on June 19, 2010 at 20:14 Surely depends on how tight the curve is. In the last month or so I've turved two curved areas ( one a shrub bed - removed and needed to be laid to lawn and the other an extension of an exisiting lawn). Both I laid full lengths of turf ( and overlapped half way as would normally). The turf will flex around the curve if gentle enough(without wrinking) but you will need to "cut in" which will inevitably create more waste. Both successful and clients pleased with result. Laying across would be easiest route and more economical...over time I doubt you'd notice if either method was employed.
© 2013 Landscape Juice ® Limited - Registered in England 08356644
Badges | Report an Issue | Privacy Policy | Terms of Service

