Open Association of Landscape Industries
latest project
This is my latest project, been after one for a while.
Didn't run when i got it, but the fuel tank appeared to be full of what can only be described as thinners, cleaned all that out, put some petrol in and the monster awoke!
I'll gather parts through the summer and i will probably set about it through the winter.
Replies to This Discussion
-
Permalink Reply by Matthew Crudgington on
-
Here are the photos from the clutch fitting. Parts came in at £120 in the end.
Took all the knackered parts off and cleaned up the parts that need to be kept.
greased up the shafts and drive gear, sprayed chain with motorcycle chain wax. If you look closely you see a split pin in the chain, this is how it came. After putting the cover back on realised it could catch so it's now facing the other way.
-
PRO MemberPermalink Reply by Roy Parker on -
I had a 24 inch cut with a 10 go engine it cut nearly anything
-
PRO MemberPermalink Reply by andy@ Doughty Garden Maintenance on -
Nice 1 Matthew, I'll save these photos to the hard drive for reference. Thanks for that.
Did it take you long to do?
Is it up and running now?
Matthew Crudgington said:Here are the photos from the clutch fitting. Parts came in at £120 in the end.
Took all the knackered parts off and cleaned up the parts that need to be kept.greased up the shafts and drive gear, sprayed chain with motorcycle chain wax. If you look closely you see a split pin in the chain, this is how it came. After putting the cover back on realised it could catch so it's now facing the other way.
- ‹ Previous
- 1
- 2
- 3
- 4
- Next ›
© 2013 Landscape Juice ® Limited - Registered in England 08356644
Badges | Report an Issue | Privacy Policy | Terms of Service
